Wiren Board 3-channel Modbus-DALI Gateway WB-DALI3

SKU code: WB-DALI3
Wiren Board 3-channel Modbus-DALI Gateway WB-DALI3
Wiren Board 3-channel Modbus-DALI Gateway WB-DALI3
Wiren Board 3-channel Modbus-DALI Gateway WB-DALI3
Add to favorites
Add to comparison table
Wiren Board 3-channel Modbus-DALI Gateway WB-DALI3
SKU code: WB-DALI3
SKU code: WB-DALI3
Stock in Germany
Pre-order only
Stock in Switzerland
Pre-order only

Features

  • Brand
    Wiren Board
All features
Price
€153.87
excluding VAT and shipping cost
Stock in Germany
Pre-order only
Stock in Switzerland
Pre-order only
Delivery
Payments
We offer three delivery options:
  • FCA – you pick up from us
  • DAP – we deliver, you do customs in your country and
  • DDP – we deliver and we do customs clearance
Wire transfers must be made net of all bank charges. Currently, w accept wired transfer only. For more payment options please contact us on sales@smartsd.ch
Order by phone+41 79 787-62-13
  • A 3-channel RS-485 gateway for controlling DALI-2 (IEC 62386) devices with Wiren Board controllers. It lets you integrate modern lighting systems (LED drivers, sensors, switches, ballasts) into industrial automation and smart home projects.

    Advantages

    • three independent DALI buses;
    • protection against short circuit, overheating, and overvoltage;
    • support for DALI-2 devices (LED drivers, ballasts, sensors, buttons);
    • 7 discrete inputs for connecting buttons;
    • recognition of 4 press types (short, long, double, short+long);
    • isolated RS-485 interface;
    • operating temperature range: -40 to +60 °C;
    • compact DIN-rail enclosure (3 modules). Supports Fast Modbus ⚡, which delivers input states and press counter values to the Wiren Board controller instantly.


    Hardware

    Technical specifications:

    • 3 outputs for connecting DALI buses (DA1: 200 mA, DA2: 100 mA, DA3: 100 mA);
    • 7 discrete inputs (dry contact);
    • output voltage 19 V;
    • group galvanic isolation of inputs;
    • protection of each bus against short circuit, overheating, and overvoltage;
    • supply voltage:
      • 9…28 V DC,
      • 230 V AC;
    • interface: RS-485, Modbus RTU.


    Fast Modbus support

    In addition to standard Modbus RTU, all Wiren Board devices support the Fast Modbus ⚡ extension, which adds:

    • instant polling of input states and counters via events;
    • fast discovery of devices connected to the bus;
    • resolution of address collisions on the bus.

    Enabling these extra capabilities is seamless for the user — if a device supports the extension, the controller's driver communicates with it over Fast Modbus; if the device knows nothing about the extension, it works over standard Modbus RTU.

    Configuration

    In the Wiren Board controller web interface, you can:

    • enable the internal power supply for each DALI bus;
    • set button press behavior and input trigger reactions;
    • control DALI devices: assign addresses, groups, scenes;
    • reset devices to factory settings;
    • control the brightness, color temperature and color of individual luminaires, groups and the whole bus;
    • configure the brightness control curve (linear / DALI standard);
    • run device identification (light flashing);
    • send arbitrary DALI commands to the bus;
    • view device status and bus traffic with decoded commands.

    Each DALI luminaire, sensor and button, as well as groups and the whole bus, appears in the controller web interface as a separate device. They can be used in automation scenarios or passed to a higher-level system.


    Quality control at each stage of production

    We develop and manufacture all Wiren Board devices ourselves. Also everyone devices undergo multi-stage quality control:

    • During development - checking the components used for compliance with the declared ones characteristics and testing of the prototype device at extreme operating conditions.
    • After installation of SMD components - automated optical control.
    • After soldering the lead components - visual inspection of soldering.
    • After assembling the device, functional testing on an automated stand.
    • When shipped to the warehouse - control of completeness, stickers, appearance.

    Thanks to this approach, the failure rate is no more than 0.5% of all released devices.

    If the device fails within two years from the date of purchase, we will replace it for free without need to be sent to a service center.



    BrandWiren Board
Close window
(Window will close in sec)